Filter
Top Products
109
GB
Using the Remote
Starting macro play
1
Press RECEIVER.
The RECEIVER button lights up, and then
turns off.
2 Press MACRO 1 or MACRO 2 to start
the macro.
The macro starts and execute the
commands in the order you assigned them.
While the commands are being sent, the
RM SET UP button flashes and the
RECEIVER button lights up. When the
commands have been sent, the RM SET UP
and RECEIVER buttons turn off.
To erase a programmed macro
1
Press MACRO 1 or MACRO 2 for more
than 1 second while pressing RM SET
UP to clear the stored macro.
The RM SET UP button flashes twice,
repeatedly.
2 Press RM SET UP.
Settings stored as macro are cleared.
Setting remote control
codes that are not stored
in the commander
Even if a remote control code is not one of the
presets stored in the remote, it is possible for
the remote to learn the code using the Learning
function.
Note
When setting up the receiver to learn the remote
command modes, replace the batteries with new
ones.
Example for assigning button 1 to VIDEO 1
of the remote:
1 Press TV while pressing RM
SET UP.
The RM SET UP button lights up.
2 Press the input button (VIDEO 1
in the example) for which you
want to use the Learning input
function.
The input button flashes. (The RM SET
UP button remains lit.)
3 Press the button (button 1 in
the example) you want to use as
the VIDEO 1 button.
The input button you selected in step 2
lights up. (The RM SET UP button
remains lit.)
1,6
1
2
continued