Filter
Top Products
13
GB
Getting Started
You can use the supplied remote RM-AAL003
to operate the receiver and to control the Sony
audio/video components that the remote is
assigned to operate (page 104).
RM-AAL003
Remote commander
Name Function
A AV ?/1
(on/standby)
Press to turn on or off the audio/
video components that the
remote is assigned to operate
(page 104).
If you press the ?/1 (B) at the
same time, it will turn off the
receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
button (C).
B ?/1
(on/standby)
Press to turn the receiver on or
off.
After pressing ZONE 2 (D),
only the receiver in zone 2 is
turned on or off with this button.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
C Input
buttons
Press one of the buttons to
select the component you want
to use. To utilize the buttons
with names in pink, press
SHIFT (wg), and then press the
button. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components (page 48). You can
program the remote to control
non-Sony components
following the steps in
“Programming the remote”
(page 104).
D ZONE 2 Press to enable zone 2 operation
(page 98).
E SLEEP Press to activate the Sleep
Timer function and the duration
which the receiver turns off
automatically (page 96).
F RECEIVER Press to enable the receiver
operation (page 54).
G 2CH Press to select a sound field
(page 72).
A.F.D.
MOVIE
MUSIC
continued