Filter
Top Products
15
GB
Getting Started
a)
See the table on page 103 for information on the
buttons that you can use to control each
component.
b)
The tactile dot is attached to these buttons (H,
PRESET+). Use as a mark of operation.
Notes
•Some functions explained in this section may not
work depending on the model.
•The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
T MASTER
VOL +/–
Press to adjust the volume level
of all speakers at the same time
(page 48).
TV VOL +/– Press TV (wj) and then press
TV VOL +/– to adjust the
volume level of the TV.
U DISC SKIP Press to skip a disc when using
a multi-disc changer.
V RETURN/
EXIT O
Press to return to the previous
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen (page 103).
W ON SCREEN Press to display the receiver
status. Then, if you press
MENU (qd), the menus of the
receiver appear (page 89).
X CLEAR Press to
– clear a mistake when you
press the incorrect numeric
button.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.
>10 Press to select
– track numbers over 10 of the
VCR, satellite tuner, CD
player or MD deck.
– channel numbers of the
Digital CATV terminal.
D.TUNING Press to enter direct tuning
mode (page 81, 86).
Y SHIFT Press to light up the button. It
changes the remote button
function to activate the buttons
with pink printing.
Z A.DIRECT Press to switch the audio of the
selected input to analog signal
without any adjustment (page
77).
wj TV Press to enable TV operation.
wk RM SET UP Press to set up the remote.
Name Function