Filter
Top Products
48
GB
Selecting a component
1
Press one of the input button.
When you want to select a
component connected to the
PHONO or the MULTI CHANNEL
INPUT jack, press SHIFT and
then press PHONO or MULTI IN.
You can also use INPUT SELECTOR on
the receiver. The selected input appears
on the display. To select a component
connected to the HDMI IN1/2 jack, press
the HDMI button repeatedly. To select a
component connected to the MULTI
CHANNEL INPUT jack, press MULTI
CH IN button.
2 Turn on the component and
start playback.
3 Press MASTER VOL +/– to
adjust the volume.
You can also use MASTER VOLUME on
the receiver.
The initial volume level is set to minimum
(muting).
Playback
1
3
MUTING
1
Selected
input
Components that can be
played back
VIDEO 1, 2 VCR, etc., connected to the
VIDEO 1 or VIDEO 2 jack
VIDEO 3 Video camera and TV game,
etc., connected to the VIDEO
3 jack
DVD DVD player, etc., connected
to DVD jack
TV/SAT Satellite tuner, etc., connected
to the TV/SAT jack
TAPE/CD-R Tape deck, etc., connected to
the TAPE jack
MD/DAT MD or DAT deck, etc.,
connected to the MD/DAT
jack
SA-CD/CD Super Audio CD or CD
player, etc., connected to the
SA-CD/CD jack
TUNER Built-in radio tuner
PHONO Turntable, etc., connected to
the PHONO jack
MULTI IN Component connected to the
MULTI CHANNEL INPUT
jack
SOURCE The current input selected for
zone 2 (Activated while
“ZONE 2” is lit.).
HDMI 1, 2 HDMI components connected
to the HDMI jack