Filter
Top Products
19
EN
Location of Parts and Basic Amplifier Operations
!™ 5.1/DVD INPUT indicator
Lights up when the component connected to the 5.1/
DVD INPUT jacks is selected.
TONE indicator
Lights up while the tone effect is turned on.
BASS BOOST indicator
Lights up while the bass booster is turned on.
!£ The following buttons operate the built-in tuner. For
details, see “Receiving Broadcasts” starting from page
25. Note that these buttons are operable only when
the tuner is selected.
DIRECT TUNING button
Enables Direct Tuning (see page 26).
SHIFT button
Selects a memory page for preset stations.
Numeric buttons (1 to 0)
Inputs the numeric value.
!¢ The following buttons operate the built-in tuner. For
details, see “Receiving Broadcasts” starting from page
25. Note that these buttons are operable only when
the tuner is selected.
TUNING +/– buttons
Scans all the available radio stations.
PRESET TUNING +/– buttons
Scans all preset stations.
FM MODE button
If “STEREO” flashes in the display and the FM stereo
reception is poor, press this button. You will not have
the stereo effect but the sound is improved.
FM/AM button
Selects the FM or AM band.
MEMORY button
Press to memorize a preset station.
!∞ CURSOR MODE button
Press this button repeatedly to select any of the
following three cursor modes. The indicator for the
selected cursor mode lights up to the left of the display
window. The indicator turns off when you press the
SET UP button.
When the cursor mode is You can
SURROUND Change the delay time, effect
level, and the volume of the rear
and center speakers (pages 22
and 23)
BASS/TREBLE Adjust the tone (bass/treble) for
the front speakers (page 23).
Press the TONE ON/OFF button
to activate the tone effect.
INDEX Enter an index name for preset
stations and program sources
(page 30)
!§ Cursor buttons ( / / / )
After pressing the CURSOR MODE or SET UP button,
use these buttons to make specific settings (see pages
12, 22, 23, and 30 to 32).
!¶ SET UP button
Press this button repeatedly to select any of the
following three indications. The selected indication
appears in the display and you will be able to make
various settings using the cursor buttons.
When you’ve
displayed
You can
CTR MODE Select any one of the four center
modes (page 12)
DSPL SET UP Set the display at any of four levels of
brightness (page 32)
REAR GAIN Increase the range of rear speakers by
5 dB (page 32)