Filter
Top Products
13
EN
Hooking Up and Setting Up the Speaker System
4 Press MODE r epeatedly to select “PRO LOGIC.”
5 Press TEST TONE on the supplied r emote.
You will hear a test tone (see this page) from each
speaker sequentially.
6 Adjust the volume level so that the volume of the
test tone fr om each speaker sounds the same fr om
where you are listening.
• To adjust the balance of the front right and front left
speakers, use the BALANCE control on the front of
the main unit.
• To adjust the volume level of the center speaker,
press the LEVEL CENTER +/– buttons on the
remote.
• To adjust the volume level of the rear speakers, press
the LEVEL REAR +/– buttons on the remote.
7 Press TEST TONE on the r emote again to tur n off
the test tone.
z
You can adjust the volume level of all speakers at the same
time
Rotate MASTER VOLUME on the main unit or press MASTER
VOLUME +/– on the remote.
z
What is a test tone?
A test tone is a signal that is produced by the receiver and used to
adjust speaker volume. The test tone is output from speakers in
the following two ways:
• When NORMAL, WIDE, or 3CH LOGIC mode is selected
The test tone is output from the front L (left), center, front R
(right), and rear speakers (except for 3CH LOGIC mode) in
succession.
3CH LOGIC
NORMAL/WIDE
• When PHANTOM mode is selected
The test tone is output from the front and the rear speakers
alternately.
PHANTOM
See the table on page 24 for information on the output of the test
tone for sound fields other than PRO LOGIC.
Test tone
Test tone
Front (L)
Center
Front (R)
Rear (L, R)
Front (L, R)
Rear (L, R)
Before You Use Your Receiver
Before turning on the receiver
Make sure that you have:
• Turned MASTER VOLUME to the leftmost position (0).
• Selected the appropriate front speakers (see “8
SPEAKERS selector” on page 17).
• Set BALANCE to the center position.
Clearing the receiver’s memory
Before you use your receiver for the first time or when
you want to clear the receiver’s memory, do the procedure
below.
TAPE/MD
VIDEO
1/u
TONE
ON/OFF
5.1/DVD
INPUT
DIRECT
TUNING
BASS
BOOST
SOUND FIELD
GENRE MODE
MUTING
BALANCE
LR
5
0
1
3
9
7
4
6
2
8
1
0
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PHONES
SPEAKERS
SET UP
SURROUND
CURSOR MODE
MEMORY
PRESET
–
TUNING
+
A
OFF
A
+
B
B
g
MASTER VOLUME
DISPLAY
FM/AMFM MODE
–
TUNING
+
SLEEP
BASS/
TREBLE
INDEX
5.1/DVD
INPUT
BASS
BOOST
TONE
SOUND FIELD
ON/OFF
SHIFT
1
6
2
7
3
8
4
9
5
0
VIDEO TV/LD TAPE/MD
FUNCTION
CD TUNER PHONO
1 Turn of f the receiver.
2 While pressing down VIDEO and T APE/MD, press
1/u to tur n on the r eceiver.
“ALL CLEAR” appears in the display and the items
including the following are reset or cleared:
• All preset stations are reset to their factory settings.
• All sound field parameters are reset to their factory
settings.
• All index names (of preset stations and program
sources) are cleared.
• All adjustments made with the SET UP button are
reset to their factory settings.
• The sound field memorized for each program source
and preset station is cleared.