Filter
Top Products
14
EN
Hooking Up and Setting Up the Speaker System
Checking the connections
After connecting all of your components to the receiver,
do the procedure below to verify that the connections are
correctly made.
MASTER VOLUME
1/u
TONE
ON/OFF
5.1/DVD
INPUT
DIRECT
TUNING
BASS
BOOST
SOUND FIELD
GENRE MODE
MUTING
BALANCE
LR
5
0
1
3
9
7
4
6
2
8
1
0
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PHONES
SPEAKERS
SET UP
SURROUND
CURSOR MODE
MEMORY
PRESET
– TUNING +
A
OFF
A
+B
B
g
MASTER VOLUME
DISPLAY
FM/AMFM MODE
–
TUNING
+
SLEEP
BASS/
TREBLE
INDEX
5.1/DVD
INPUT
BASS
BOOST
TONE
SOUND FIELD
ON/OFF
SHIFT
1
6
2
7
3
8
4
9
5
0
VIDEO TV/LD TAPE/MD
FUNCTION
CD TUNER PHONO
1 Press 1/u to tur n on the r eceiver.
2 Press a FUNCTION button to select a component
(program sour ce) that you have connected (e.g., CD
player or tape deck).
3 Turn on the component and star t playing it.
4 Rotate MASTER VOLUME to tur n up the volume.
If you did not obtain normal sound output after
performing the procedure above, look for the reason in
the following check-list and take the appropriate
measures to correct the problem.
There is no sound no matter which component is
selected.
/ Check that both the receiver and all components
are turned on.
/ Check that the MASTER VOLUME control is not
set at 0.
/ Check that the SPEAKERS selector is not set at
OFF or at a position for front speakers that are not
connected to the receiver (see “8 SPEAKERS
selector” on page 17).
/ Check that all the speaker cords are connected
correctly.
/ Press the MUTING button to turn off the indicator
to the left of the button.
FUNCTION buttons
Before You Use Your Receiver
There’s no sound from a specific component.
/ Check that the component is connected correctly to
the audio input jacks for that component.
/ Check that the cord(s) used for the connection is
(are) inserted fully into the jacks on both the
receiver and the component.
No sound is heard from one of the front
speakers.
/ Check that the BALANCE control is set at center
position (see “6 BALANCE control” on page 17).
/ Connect a pair of headphones to the PHONES jack
and set the SPEAKERS selector to OFF to verify
that sound is output from the headphones (see “8
SPEAKERS selector” and “PHONES jack” on page
17).
If only one channel is output from the connected
headphones, the component and the receiver may
not be connected correctly. Check that all the cords
are fully inserted into the jacks on both the receiver
and the component.
If both channels are output from the headphones,
the front speaker may not be connected to the
receiver correctly. Check the connection for the
front speaker from which no sound is output.
If you encounter a problem that is not included above, see
“Troubleshooting” on page 33.