Filter
Top Products
CUSTOM AUDIO ADJUSTMENT
VOLUME CONTROL
Turn the VOLUME control on the unit, or press the VOLUME
buttons on the remote control,
The volume level is shown on the display for four seconds. Itcan
be adjusted between Oand MAX (31). It flashes when set over
the level of 21.
The volume level remains memorized even after the power is
turned c)ff.However, if the power is turned off when the volume
is set to more than 17, it is automatically set to 16 the next time
the power is turned on.
To adjLlst the Ieftiright balance of the front speakers
Press the BALANCE button to display “L/R OdB. Then press
the DOWN or UP button repeatedly or turn the MULTI JOG within
four seconds.
Note that the front speaker balance for the Dolby Digital and
Dolby Pro Logic modes is also changed.
To mute the sound temporarily
Press the MUTING button (–20 dB).
“MUTE ON” appears on the display for four seconds. While muting
the sound, the selected function indicator flashes. Press the
MUTING button again to restore the sound.
EEm
* The BBE system is automatically canceled:
- When the DIGI1-AL (Dolby Digital) mode is selected
- When the Dolby Pro Logic is turned on
● The BBE system cannot be turned on:
- While the DIGITAL (Dolby Digital) mode is selected
- While the Dolby Pro Logic is turned on
SUPER T-BA!SS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press the T-BASS button.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
m
IEE!E3
Low-frequency sound may be distorted when the T-BIASSs!lstem
is used for a disc or tape in which low-frequency
sound is
originally emphasized. In this case, cancel the T-BASS system.
SOUND ADJLISTMEINT DURING RECORDING
The output volume and tone of the speakers or headphones may
be freely varied without affecting the level of the recording.
ENGLISH 8