Filter
Top Products
DSPWURROUND
To adjust the volume and balance of the surround
W~&$$J%&
,~y%q~~,.~$
speakers
iWa%%&
g&~**
Press the MANUAIL SELECT button on the remote controll twice
&l&*g#*&&@
‘ma%2P&%!
DOWN,UP
DSP
MANUAL
SELECT
DOWN,UP
to display “SUR OdB while the DSP system is turned on Then
press the DOWN or UP button repeatedly or turn the MUL1”I
JOG within four seconds.
m
● The DSP system is automatically canceled:
- When the Dolby Pro Logic is turned on
- When the DIGITAL (Dolby Digital) mode except “2ch STEREC)”
is selected
● The DSP system cannot be turned on:
- While the DIGITAL (Dolby Digital) mode except “2ch STEREC)”
is selected
- While the Dolby Pro Logic is turned on
- While headphones are plugged in
The DSP (Digital Signal Processor) surround circuits can recreate
the effect of sounds reflected from walls or ceilings, to obtain the
sound presence of real environments. There are four modes with
matching graphic equalization modes. Equalization modes are
selected automatically and can also be selected or turned off to
suit yoLlr preference,
Press the DSP button, and turn the MULTI JOG until
the desired DSP mode is displayed.
The selected mode name is displayed for four seconds, and the
indicators P appear on the left sides of the selected DSP name
and matching GEQ mode name.
SelecteddDSPmode
Matching GE(2mode
When ‘the music source is monaural
Select LIVE to obtain a simulated stereo effect. When DANCE,
HALL or ARENA is selected, no sound will be heard from the
surrourld speakers.
To cancel the selected mode
Press the DSP button to display the DSP mode name, and press
the button again within 4 seconds. “DSP OFF appears on the
display. Even if canceling the selected DSP mode, the matching
or selected GEQ mode still remains.
To select with the remote control
Press the DSP button repeatedly until the desired DSP mode is
displayed.
Four DSP modes and “DSP OFF” can be selected.
ENGLISH 110