Filter
Top Products
80
Using the RM-US105 remote
(continued)
To set to the 2nd room mode
1 Press USE MODE.
The current remote mode button slowly
lights up 5 times.
2 Press 2ND ROOM while the button
blinks.
The command mode has been set to the 2nd
room mode.
To change the button assignments
for the 2nd room mode
When the remote is set to the 2nd room mode,
you can set the remote to turn on/off the
receiver or adjust the volume.
You can assign the following buttons:
?/1, MUTING, MASTER VOL +, MASTER
VOL –
Example: To set the command mode of above 4
buttons to “AV SYSTEM 1” while in the 2nd
room mode.
1 Press USE MODE more than 2 seconds.
The indicator remains lit.
2 Press 2ND ROOM.
3 Press AV SYSTEM 1.
4 Press SOURCE.
The indicator slowly lights up twice, then
goes off.
For the above 4 buttons, the signals for AV
SYSTEM 1 are output even in the 2nd room
mode. Besides, you can operate the receiver
whose command mode is “AV SYSTEM
1”.
To set to the 3rd room mode
1 Press USE MODE.
The current remote mode button slowly
lights up 5 times.
2 Press 3RD ROOM while the button
blinks.
The command mode has been set to the 3rd
room mode.
Buttons that can be used in the 3rd
room mode
Button(s) Function
?/1 Turns on/off the sound output
from the SPEAKERS 3RD
ROOM jacks.
Function buttons Switch the source output from
the SPEAKERS 3RD ROOM
jacks.
MUTING Mutes the sound.
MASTER VOL +/– Adjusts the volume.