Filter
Top Products
20
Multi channel surround setup
(continued)
When placing surround speakers behind you
Note
Do not place the center speaker farther away from the
listening position than the front speakers.
Tip
When setting up the surround back speaker, set the
speaker at least 3 feet behind the listening position. It
is recommended to place the speaker at an equal
distance from the surround left and right speakers. If
there is no space behind the listening position, set the
speaker above the listening position by placing it on a
stand or hanging it from the ceiling. To prevent
speaker damage or injury in case the speaker falls,
make sure that it is properly fixed in place.
Specifying the speaker
parameters
1 Press SET UP.
2 Press the cursor buttons ( or ) to
select the parameter you want to
adjust.
3 Turn the jog dial to select the setting
you want.
The setting is entered automatically.
4 Repeat steps 2 and 3 until you have set
all of the parameters that follow.
Initial settings
Parameter Initial setting
FRONT SP LARGE
CENTER SP LARGE
SURROUND SP LARGE
SURR BACK SP LARGE
SURR BACK L/R NO
SUB WOOFER YES
FRONT 16 feet
CENTER 16 feet
SURROUND 11 feet
SURR BACK 11 feet
SUB WOOFER 16 feet
S.W PHASE NORMAL
DISTANCE UNIT feet
SURR POSI. SIDE
SURR HEIGHT LOW
SURR BACK HGT. LOW
FRONT SP >* STD (120 Hz)
CENTER SP >* STD (120 Hz)
SURROUND SP >* STD (120 Hz)
SURR BACK SP >* STD (120 Hz)
LFE HIGH CUT > STD (120 Hz)
* When the speakers are set to SMALL only.
x Front speaker size (FRONT)
• If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
• If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer.
• When the front speakers are set to “SMALL”,
the center, surround, and surround back
speakers are also automatically set to
“SMALL” (unless previously set to “NO”).
45°
90°
20°
A A
B
CC
D