Filter
Top Products
82
Troubleshooting
Appendix
a) Displayed only when DISPLAY CONTROL >ALARM is set to “ON” or
“LIMITED”.
HD 60I/30P
a)
DISC CANNOT BE RECORDED. HD 60I
or HD 30P CLIP(S) EXIST.
This appears when the system frequency of this unit
does not match that of the loaded disc.
Insert a disc that matches the system frequency, or
change this unit's system frequency setting (see page
22).
HD 50I/25P
a)
DISC CANNOT BE RECORDED. HD 50I
or HD 25P CLIP(S) EXIST.
HD 23P Disc
a)
DISC CANNOT BE RECORDED. HD
23.98P CLIP(S) EXIST.
ILL. REF!
a)
INPUT VIDEO SIGNAL DOES NOT
SYNCHRONIZE WITH REF VIDEO
SIGNAL.
USE COMMON REFERENCE SIGNAL
OR CONNECT RECORDER REF OUT TO
PLAYER REF IN.
Input a reference signal synchronized with this unit’s
system frequency.
ILL. REC!
a)
ENCODING DOES NOT SYNCHRONIZE
WITH REF VIDEO.
Check the signals being input to this unit.
ILL. PLAY!
a)
ILLEGAL PLAYBACK. Check the disc being played by this unit.
MEM. Full!
a)
MEMORY FULL !! Check the disc being recorded by this unit.
MEM. Empty!
a)
MEMORY EMPTY !!
Recording NOW RECORDING ... Wait for recording to finish.
Alarm message in time
data display section
Alarm message in monitor video
section
Description/action