Filter
Top Products
31
Superimposed Text Information
Chapter 2 Preparations
The following tables show the on-screen indications of
supplementary information and their meaning.
When the menu item SUB STATUS is set to “TC
MODE”:
When the menu item SUB STATUS is set to
“REMAIN”:
Setting of menu item
SUB STATUS
Items of supplementary
information displayed
TC MODE Operating mode of the internal
timecode generator
REMAIN Amount of free capacity on the
disc (in minute units).
CLIP NO Clip number
On-screen
indication
Meaning
INT PRST FREE The internal timecode generator is
operating in FREE RUN mode.
INT PRST REC The internal timecode generator is
operating in REC RUN mode.
INT REGEN-T&U The internal timecode generator is in
synchronization with the playback
timecode (LTC) read from disc.
EXT LTC-T&U The internal timecode generator is in
synchronization with the external
timecode (LTC) input to the unit and is
generating the same timecode values
and user bit values as those of the
external timecode (regeneration).
EXT VITC-T&U The internal timecode generator is in
synchronization with VITC present in
the external video signal input to the
unit and is generating the same
timecode values and user bit values as
those of the external timecode
(regeneration).
EXT DVIN-T&U The internal timecode generator is in
synchronization with the external
timecode input to the unit via the
S400 connector and is generating the
same timecode values and user bit
values as those of the external
timecode (regeneration).
EXT DVIN.V-T&U The internal timecode generator is in
synchronization with the external VITC
input to the unit via the S400
connector interface and is generating
the same timecode values and user bit
values as those of the external
timecode (regeneration).
On-screen
indication
Meaning
REMAIN 120 min Remaining capacity of the disc in
minutes. When the remaining capacity
has not been calculated, “REMAIN ---
min” appears.