Filter
Top Products
29
Superimposed Text Information
Chapter 2 Preparations
To increase or decrease the values of the flashing
digits
Use the arrow buttons (M/MARK1, m/MARK2) or jog
dial.
To return the settings to the factory defaults
Press the RESET button.
6
When you are finished making adjustments, press the
SET button.
The message “NOW SAVING...” appears, the settings
are saved, and the menu closes.
To clear the menu from the screen without saving
adjustments
Press the MENU button twice in succession.
Superimposed Text
Information
The HDSDI signals output from the HDSDI OUTPUT 1
and 2 connectors and the MONITOR connector, the
SDSDI signals output from the SDSDI OUTPUT
connector, and the composite signals output from the
COMPOSITE OUT connector can contain superimposed
text information, including timecode, menu settings, and
alarm messages.
To turn superimposed text on and off
Set the CHAR SEL item on page P1 of the function menu.
ON: Display superimposed text.
OFF: Do not display superimposed text.
LCD: Display superimposed text on the LCD panel of this
unit, but do not display it on an external video monitor
connected to this unit.
Even when ON is selected, you can forcibly turn off the
superimposition of character information in HD output by
setting the SETUP MENU >DISPLAY CONTROL >HD
CHARA item.
Information displayed
a) Only when the system frequency is 60I/30P.
a Type of time data
Note
Display Meaning
CNT Counter data
TCR TC reader timecode data
UBR TC reader user bits data
TCR 00:04.47.07*
PLAY LOCK
1 Type of time data
2 Timecode reader drop
frame mark
a)
3 Timecode generator drop
frame mark
a)
4 VITC field mark
5 Operation mode
Time data