Filter
Top Products
76
NO GROUP • You tried to release a group setting with a disc that has no groups.
, Insert a disc with group settings.
• You selected “ : Erase” with a disc without group setting.
, You cannot erase groups with a disc with no groups.
NO INPUT
SIGNAL
• The recorder could not detect digital input signals.
, Make sure that the source is connected firmly (page 15).
NO NAME • You tried to select “Artist” in the Main play mode with a disc that has no
artist name information.
• You tried to select “by Artist” in the Search function with a disc that has
no artist name information.
NON GROUPED
TRACK
• You selected “ : Move” or “ : Erase”, or you tried to label a group
while the recorder is stopped or while playing a track that does not
belong to a group.
, Select a track within a group you want to edit, and then do the editing
operation again.
NotENOUGH
POWER TO
EDIT
• You tried to edit the contents of a 1GB Hi-MD disc with insufficient
battery power for editing (page 65).
, Insert a new alkaline dry battery or connect the AC power adaptor
(not supplied) to the recorder.
NotENOUGH
POWER TO
REC
• You tried to record on a 1GB Hi-MD disc with insufficient battery power
for recording (page 65).
, Insert a new alkaline dry battery or connect the AC power adaptor
(not supplied) to the recorder.
NO TITLE • You tried to select “Album” in the Main play mode with a disc that has no
album name information.
• You tried to select “by Album” in the Search function with a disc that has
no album name information.
NO TRACK • You tried to play a disc with no recorded tracks.
, Insert a recorded disc.
NO TRACK IS
SELECTED
• You selected “ : Move” or “ : Erase”, or you tried to lable a track
without first selecting a track.
, Do the editing operation again after selecting the desired track first.
P/B ONLY DISC • You tried to record or edit on a premastered disc (P/B stands for
“playback”).
, Insert a recordable disc.
PC – –MD • The recorder is connected to the computer.
PROTECTED
DISC
• You tried to record or edit on a disc with the tab in the record-protect
position.
, Slide the tab back (page 62).
PUSH STOP
BUTTON
• You tried to open the lid by sliding the OPEN switch while the recorder
was storing disc information with the dedicated USB cable connecting
the recorder to a computer.
, Operation must be done only after pressing x and “SYSTEM FILE
WRITING” has disappeared from the display.
Message Meaning/Remedy