Filter
Top Products
49
Dividing a track (Divide)
You can divide a track with a track mark,
creating a new track from the part
following the track mark. The track
numbers will increase as follows.
•You cannot add a track mark on a track that
has been transferred from your computer.
•You cannot divide a track that has been
recorded in Hi-MD mode using the MD
Simple Burner software.
•The Bookmark setting will be erased if you
carry out the Divide function.
•You cannot divide a track at its beginning or
end.
•You cannot divide a track if after the division
causes the total number of tracks on the disc to
exceed the maximum allowed (2,047 tracks
for a disc used in Hi-MD mode or 254 tracks
for a standard disc).
While playing or pausing, press T MARK
on the recorder at the point you want to
mark.
“MARK ON” appears in the display, and
a track mark is added. The track number
will increase by one.
To add track marks while
recording (except while
synchro-recording)
Press T MARK at the point you want to
add a track mark.
You can use Time Mark to add track
marks automatically at specified intervals
(except while digital recording) (page 29).
Combining tracks
(Combine)
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark.
The track numbers will change as follows.
•You cannot erase a track mark on a track that
has been transferred from your computer.
•You cannot erase a track mark on a track that
has been recorded in Hi-MD mode using the
MD Simple Burner software.
•You cannot combine tracks recorded in
different recording mode.
Notes
Dividing a track directly
1 342
231 4 5
Track marking
Track numbers increase.
T MARK
Notes
1 342
132
Erase a track mark
Track numbers decrease
T MARK
5-way control key (.)
X