Filter
Top Products
20
If the play does not start
Make sure the recorder is not locked (pages 12,
13).
The playback sound may skip if:
•the recorder receives stronger continuous
shock.
•a dirty or scratched disc is played.
When using a disc in Hi-MD mode, the sound
may drop out for a maximum of about 12
seconds.
To Operation on the recorder
Stop Press x.
Pause Press X. Press X again to resume play.
Select a track directly
viewing track number or
name
Turn the jog dial to select a track, and then press NENT to enter.
Find the beginning of
the current track
Press the 5-way control key towards .. Press the 5-way control
key towards . repeatedly until you reach the beginning of the
desired track.
Find the beginning of
the next track
Press the 5-way control key towards >.
Go backwards or
forward while playing
Press and hold the 5-way control key towards . or >.
Search for a point in a
track while viewing the
elapsed time (Time
search)
While pausing, press and hold the 5-way control key towards .
or >.
Search for a specific
track while viewing
track numbers (Index
search)
While the recorder is stopped, press and hold the 5-way control key
towards . or >.
Cue to the next or
previous group while
playing a track in a
group (Group skip).
1)
Press GROUP, and then press the 5-way control key towards .
or >.
Start with the first track
of the disc
While the recorder is stopped, press NENT for 2 seconds or more.
Remove the disc Press x and open the lid.
2)
1)
Cues to the beginning of every 10th track during playback of the disc with no group settings.
2)
Once you open the lid, the point to start play will change to the beginning of the first track.
Note