Filter
Top Products
70
Notes
• The settings for up to 20 discs can be stored.
Any settings stored afterwards will replace the
settings for the least used disc among the 20.
• If you add tracks or perform an editing
operation (not including labeling) to a disc
whose settings have been stored on the
recorder, the disc will no longer be
recognizable by the recorder and the stored
information will become useless. In this case,
store the settings again.
• If you try to erase the disc information of a
disc that have never been stored, “No Entry!”
appears in the display for 2 seconds.
Protecting your hearing
(AVLS)
The AVLS (Automatic Volume Limiter
System) function keeps down the
maximum volume to protect your ears.
On the recorder
1 Press the jog dial.
2 Turn the dial until “OPTION” flashes
in the display, and then press to enter.
3 Turn the jog dial until “AVL S”
flashes in the display, and then press
to enter.
4 Turn the jog dial until “AVLS ON”
flashes in the display, and then press
to enter.
When you try to turn the volume too
high, “AV LS ” appears in the display.
The volume is kept to a moderate
level.
On the remote control
1 Press DISPLAY for 2 seconds or
more.
2 Turn the control repeatedly until
“OPTION” flashes in the display, and
then press x to enter.
3 Turn the control repeatedly until
“AV L S ” flashes in the display, and
then press x to enter.
4 Turn the control repeatedly until
“AVLS ON” flashes in the display,
and then press x to enter.
To cancel the AVLS
Select “AVLS OFF” in step 4.
Jog dial
DISPLAY
Control
x