Filter
Top Products
52
The buttons used for character input
and their functions are listed below.
7 Repeat step 6, and then enter all
characters of the label name.
8 Press the jog dial for 2 seconds or
more
.
The disc is labeled.
On the remote control
1 Insert a disc and do the following operations.
To label a track:
Start playing or recording the track you want
to label, and then label the track while the
recorder is playing or recording.
To label a group:
Turn group mode on (page 32) and start
playing or recording the track within the
group you want to label, and then label the
group while the recorder is playing or
recording.
To label a disc:
Label a disc while the recorder is stopped or
recording. If the disc has group settings, turn
group mode on (page32).
2 Press DISPLAY for 2 seconds or more.
3 Turn the control repeatedly until “EDIT”
flashes in the display, and then press x to
enter.
4 Turn the control repeatedly until the
following item appears in the display, and
then press x to enter.
When labeling a track: “ :Name”
When labeling a group: “GP: Name”
When labeling a disc: “ :Name”
The cursor flashes in the display and the
track, group, or disc is ready to be labeled
Functions
1)
Operations
To move the
cursor in the
character palette.
Control bar
Turn the jog dial
(move the cursor
upward or
downward)
2)
.
To select a
character in the
letter input area.
Turn the jog dial.
To enter a letter. Press N
Press the jog dial.
To move the
cursor from the
letter input area
to the character
palette.
Flip the bar towards
x.
To move the
cursor from the
character palette
to the letter input
area.
Press GROUP/
CANCEL.
To enter a name. Press the jog dial for
2 seconds or more.
Press N for 2
seconds or more.
To insert a blank
space before the
cursor.
Press VOLUME +.
To delete a letter. Press VOLUME –.
To display “:”,
“–” or “/” at the
input position in
the letter input
area.
Press T MARK
repeatedly.
To cancel
labeling.
Press CANCEL in
the letter input area.
up
left
right
down
1)
Functions of the buttons or the control may
differ depending on when the cursor is in the
letter input area or in the character palette.
2)
If you have stored phrases that you often use in
the name bank, the first phrase stored appears
in the display (page 54).