Filter
Top Products
47
4 Press x to set the playback speed.
z
The settings can be stored to the Personal Disc
Memory (page69).
Notes
•The playback sound will be affected by the
playback speed.
•All settings will be lost when you remove the
disc from the recorder (except when the
setting is stored to the Personal Disc
Memory).
Checking the remaining
time or the playing
position
You can check the track name, disc name,
etc. during playback. Group-related items
appear only when a track with group
settings is played.
On the recorder
1 While the recorder is playing, press
the jog dial.
2 Turn the dial until “DISPLAY”
flashes in the display, and then press
to enter.
3 Turn the jog dial until the information
you want flashes in the display.
Each time you turn the dial, the
display changes as follows.
LapTime (The elapsed time.)
r
1 Remain (The remaining time of
the current track.)
r
GP Remain (The remaining time
after the current location in the
group.)
r
AllRemain (The remaining time
after the current location.)
r
RecDate (Recording date and
time.)
Note
Items may appear differently depending on
group mode’s on/off status or the recorder’s
operating status.
001
S 01:20
“S” appears to the right of the elapsed time
during playback speeds other than normal.
Display window on the remote control
Display window on the recorder
“S” appears to the right
of the track number.
Jog dial
DISPLAY
continued