Filter
Top Products
29
Recording in analog
(Analog Recording)
The sound will be sent from the
connected equipment as analog signal but
will be recorded digitally on the disc.
To connect to a sound source, an optional
line cable is required. When connecting
the cable, make sure to insert the
connectors firmly.
1 Press and slide REC to the right.
“REC” and the REC LED on the
recorder light up in the display and
the recording starts.
2 Play the source you want to record.
For other recording operations, see
“Recording an MD right away!
(Synchro-recording)” (page 19).
z
LINE IN (OPT) jack is for both digital and
analog input.
The recorder automatically recognizes the type
of line cable and switches to digital or analog
input.
Note
If you temporarily stop a recording operation
by flipping the bar towards X, a track mark will
be added at that point when you flip the bar
towards X again to resume recording. The
recording resumes on a new track.
CD player,
cassette recorder,
etc.
R (red)
L
(white)
Line cable*
to LINE IN (OPT)
to LINE OUT jacks, etc.
REC
∗ Use the connecting cords without an
attenuator. To connect to a portable CD
player having a stereo mini-jack, use a
connecting cord with a stereo-mini plug
on both ends (not supplied).