Filter
Top Products
57
Searching for a phrase by its
first letter
On the recorder
1 Follow steps 1 and 5 of “Labeling
recordings” (page 51).
A track, group or disc is ready to be
labeled.
2 Turn the jog dial until the letter which
the desired phrase begins with.
3 Press END SEARCH to search so
that the phrase corresponding to the
letter appears.
4 Flip the bar towards x to move the
cursor from the letter input area to the
character palette.
5 Turn the jog dial until the desired
phrase flashes in the display and then
press the jog dial.
The phrase is selected and lights up in
the letter input area.
6 Press the jog dial for 2 seconds or
more.
The selected phrase is retrieved.
7 If you continue labeling operation, do
steps 5 to 7 of “Labeling recordings”
(page 51).
On the remote control
1 Follow steps 1 to 5 “On the remote control”
in “Labeling recordings” (page 52).
A track, group or disc is ready to be labeled.
2 When labeling a track, group, or disc, turn
the control repeatedly until the letter which
the desired phrase begins with flashes in the
display.
3 Press X repeatedly to search so that the
phrase corresponding to the letter appears.
When the letter appears, turn the control
towards N> until the desired phrase
appear one by one.
4 Press
x while the phrase you want is shown
in the display.
5 Press
x for 2 seconds or more.
The selected phrase is retrieved.
6 If you continue labeling operation, do steps 5
to 7 of “On the remote control” in “Labeling
recordings” (page 52).
Erasing phrases
On the recorder
1 While the recorder is stopped, press
the jog dial.
2 Turn the jog dial until “EDIT” flashes
in the display, and then press to enter.
3 Turn the jog dial until “BankErase”
flashes in the display, and then press
to enter.
4 Turn the jog dial until the phrase you
want to erase flashes in the display,
and then press to enter.
“Erase!” appears and the phrase is
erased.
On the remote control
1 While the recorder is stopped, press
DISPLAY for 2 seconds or more.
2 Turn the control repeatedly until “EDIT”
flashes in the display, and press
x to enter.
3 Turn the control repeatedly until
“BankErase” appears in the display, and then
press
x to enter.
4 Turn the control repeatedly until the phrase
you want to erase appears, and then press
x
to enter.
To cancel the operation
• On the recorder
Press CANCEL.
“CANCEL?” and “PushENTER” appear
in the display, and then press the jog
dial.
• On the remote control
Press DISPLAY for 2 seconds or more.