Filter
Top Products
33
To cancel group mode
• On the recorder
Press GROUP for 2 seconds or more.
• On the remote control
Select “GROUP OFF” in step 3.
Recording a track into a new
group
• This function can be operated on the
recorder only.
• Turn group mode on.
1 Press END SEARCH while the
recorder is stopped.
2 Press and slide REC to the right.
3 Play the source sound.
To stop recording
Flip the bar towards x.
The material that was recorded up until
the bar was flipped towards x is entered
as a new group.
Recording a track into an
existing group
• This function can be operated on the
recorder only.
• Insert a disc with group settings.
• Turn group mode on.
1 Press GROUP slightly.
“” flashes in the display and you
can select a group directly (group
skip mode) (page 41).
2 Within 5 seconds, press . or >
repeatedly until the group you want
the track to belong to appears.
After a while, flashing “” will
stop flashing and remain lit in the
display.
3 Press and slide REC to the right.
4 Play the source sound.
Newly recorded track is added after
the current contents.
Notes
•Even if “REC-Posi” is set to “From Here”,
newly recorded tracks are inserted after the
existing tracks in the specified group without
recording over the current contents.
•Group skip mode turns off automatically in
step 2 if nothing is done within 5 seconds. To
continue the procedure, do step 1 again.
z
•To add a track that is playing to a group, stop
playing the track first, and then do the
procedure from step 3.
•The recorder will not overwrite existing
material when group mode is on. In group
mode, you can only record tracks to create a
new group (page 33) or record tracks within
an existing group (page 33).
Recording without
overwriting existing
material
If you wish to avoid recording over the
current contents of an MD, do the
following procedure. All new material
will then be recorded from the end of the
current contents. The recorder is factory
set to record over existing material.
1 While the recorder is stopped, press
the jog dial.
2 Turn the jog dial until “OPTION”
flashes in the display, and then press
to enter.
Jog dial
continued