Filter
Top Products
23
GB
Network connections
Checking the wireless
LAN environment of your
home network
You need the following environment to use the
Home Network, Music Service, and PARTY
STREAMING functions. Confirm your
environment in advance.
A wireless LAN home network
environment must be available. (Make
sure that a wireless LAN router is used.)
A device that can be used as a server (a
computer, etc.) must be connected to
your wireless LAN home network*.
Internet access must be available.
(When you want to listen to music
services.)
* For details on servers that are compatible with this
system, see page 37.
There are several connecting methods you can use
to set up a wireless network: searching for an
access point, using a WPS connecting method
(either the push-button method or the PIN code
method), or manual setting. Select the connection
method that can be used for your home network
using the chart on page 22.
Notes
• Make sure not to use the wireless LAN function where
medical equipment (such as a pacemaker) is used or
where the use of wireless communication is prohibited.
• Before connecting to your home network, you need to
prepare a wireless LAN router/access point. For details,
refer to the operating manual supplied with the device.
• Depending on your home network environment, the
wireless LAN router/access point may have been set up
such that it cannot be connected using WPS, even
though it is compatible with WPS. For details on
whether your wireless LAN router/access point is
compatible or not compatible with WPS, and on the
setup of a WPS connection, refer to the operating
manual supplied with your wireless LAN router/access
point.
• You may encounter setup difficulties if the system and
the wireless LAN router/access point are located too far
from each other. If you do, move the devices closer to
each other.
Searching for an access
point and setting up a
wireless network
(access point scan
method)
You can set up a wireless network by searching for
an access point. To set up the network using this
connection method, you will be required to select
or enter the following information. Check the
following information in advance, and record it in
the space provided below.
The network name (SSID*
1
) that
identifies your network*
2
. (This will be
needed in step 6.)
:
If your wireless home network is
secured by encryption, the security key
(WEP key, WPA/WPA2 key) for your
network*
2
. (This will be needed in step
7.)
:
*
1
SSID (Service Set Identifier) is a name that identifies a
particular access point.
*
2
This information should be available from a label on
your wireless LAN router/access point, from the
operating manual, from the person who set up your
wireless network, or from the information provided by
your Internet service provider.
For details on menu operations and entering
characters during setup, see “Menu/list operation”
(page 15) and “Entering characters” (page 14).
Internet
Wireless LAN
router/access
point
Server
The unit