Sony HDX576WF Stereo System User Manual


 
Usingthe Control for
HDMI Function for
"BRAVIA" Sync
This flmction is available onTVs with the
"BRAVIA"Sync fimction only.
By connecting Sony components that are
compatible with the Control lk}rHDMI function
with anHDMI cable (not supplied), operation is
simplified as below:
Theater Mode (page 80)
One-Touch Play (page 8{))
- System Power Off (page 80)
System Audio Control (page 81)
Vohnne Limit (page g1)
Control lk}rHDMI is a mutual control function
standard used by CEC (Consumer Electronics
Control) tk}rHDMI (High-Definition
Multimedia Interface).
The Comrol for HDMI fimction will not work in
the lollowing cases:
- When you connect this system to a
compouem which is not compatible with the
Control lk}rHDMI function.
- A component does not have an HDMI jack.
There are convenient buttons on the system's
remote lk)roperating the TV. such as
THEATER, ONE-TOUCH PLAY, TV I1_. For
details, see "Controllingthe TV with the
Supplied Remote" (page 91) and refer to the
operating instructions of the TV.
2!!121!:+_i_!i
ooAv,Asy,,c
Depending on the connected component, the Control
for HDMI fimction may not work. Rel_:rto the
operating instructions supplied with the component.
• The Control for HDMI fimction may not work if you
connect a component other than Sony, even if the
component iscompatible with the Control fur HDMI
function.
(Control for HDMI - Easy Setting)
The system is compatible with the Control l\)r
HDMI -Easy Setting function. Ifthe TV is
compatible with the Control l;.)rHDMI - Easy
Setting function, you can set the system's
[CONTROL FOR HDMI] fuuctiou
automatically by setting the TV. For details,
refer to the operating instructions of the TV.
If the TV is not compaOble with the Control l;ar
HDMI -Easy Setting function, set the Control
t_)r HDMI fln]ction of the system and TV
manually.
Displayed items varydepeMing on the country
model
1 Make sure that the system and the TV
are connected with an HDMI cable.
2 Turn on the TV and press I/@ to turn on
the system.
3 Switch the input selector on your TV so
that the signal from the system through
the HDMI input appears on the TV
screen.
4 Set the Control for HDMI function of the
system and TV.
For details of the setting of the system, see
the l\)llowiug Steps. For details of the
setting of the TV, refer to the operating
instructions of the TV (depending on the
TV, the default setting of the Control for
HDMI function is set to off).
m
O
o
o
-1-
m
m
x
e-
<
7gus