Filter
Top Products
m
• You may not be able to use the instant replay or
instal/t advance l/inction with some scenes.
• Noise may come from the disc changer when
changing discs or turning the system on/off.
However, this isjust noise produced by the operation
of the internal mechanisms and does not indicate a
malfunction.
To turn on/off the DISC 1-5
indicators' illumination
When you do not operate the system _r more
than 30 minutes, the illumination of the DIS(" 1-
5 indicators starts automatically. You can turn
the ilhlmiuation ou/off.
1 Press SYSTEM MENU.
2 Press ,I,/4,repeatedly until "ILLUM
MODE" appears in the front panel
display, then press @ or -.>.
3 Press ,I,/4,to select a setting.
• "ILLUM ON": On.
• "ILLUM OFF": Off.
4 Press @.
The setting is made.
i
5 Press SYSTEM MENU.
The system menu turns off.
To change the angles
If various mlgles (multi-angles) for a scene are
recorded on a DVD VIDEO, you call change the
viewing angle.
Press ANGLE during playback to select the
desired angle.
•Depending on the DVD VIDEO, you may notbe abh:
to change tile angle even ifnmhi-angles are recorded
on the DVD VIDEO.
To display the subtitles
_E3
If subtitles are recorded on a disc, you can turn
the subtitles on/off during playback. If
multilingual subtitles are recorded on the disc.
you Call change the subtitle language during
playback, or turn the subtitles on/off whenever
you wail[.
Press SUBTITLE during playback to select
the desired subtitle language.
• Depending on the DVD VIDEO, younmy not be able
to change the subtitles even ifmultilingual subtitles
are recorded on the disc. You also m,y not be able to
turn them off.
When the system is playing a DVD VIDEO
recorded ill multiple audio li)rmats (PCM,
Dolby Digital, MPEG audio, or DTS), you call
change the audio l\trmat. If the DVD VIDEO is
recorded with multilingual tracks, you call also
change the language.
With a VIDEO CD, CD, DATA CD, or DATA
DVD, you can select tile sound from the right or
lefl channel and listen to tile sound of the
selected channel through both the right and lefl
speakers.
You cannot change tile sound t_r a Super Audio
CD.
Press AUDIO repeatedly during playback to
select the desired audio signal.
• DVD VIDEO
Depending on the DVD VIDE(), the choice of
language varies.
When 4 digits are displayed, they indicate a
language code. See "Language Code List"
(page 113) to confirm which language the code
represents. When the same language is
displayed two or more times, the DVD VIDEO
is recorded in multiple audio formats.
54_s