Filter
Top Products
Picture
Symptom
Thereisnopicture.
Picture noise appears.
Even though you set the aspect
ratio in [TV TYPE] of ]VIDEO
SETUP], thepicture does not fill
the TV screen.
Color irregularity occurs on the
TV screen.
Remedy
•The vide(>connecting cords are not connected securely.
• The vide(>connecting cords are damaged.
• The unit isnot connected to the correct TV input jack (page28).
• The video input on the TV is not set so that you can view pictures from the
system.
• Check the output method on your system (page 28).
• You have setprogressive format but your TV cannot accept the signal in
progressive format. In this case, return the setting to interlace format (the
delimit setting) (page 46).
• Even if your TV iscompatible with progressive format (525p/625p) signals, the
image may be affected when you set progressive R)rmat.In this case, return the
setting to interlace format {thedefauh setting) (page 46).
• Re-connect the connecting cord securely.
• The unit isconnected toan input device that is not HDCP (High-bandwidth
Digital Content Protection) compliant ("HDMI" on the front panel does not
light up) (page 28).
• Ifthe HDMI OUT jack isused for video output, changing the type of video
signd output from the HDMI OUT.jack. It may solve the problem (page 46).
Connect the TV and theunit using avide(>jack other than the HDMI OUT, and
switch the TV's input to the connected video input so that you can see the on-
screen displays. Change the type of vide(>signal output from the HDMI OUT
jack, and switch theTV's input back to HDMI. Ifthe picture still does not
appear, repeat the Steps and tWother options.
• You have set[PROGRESSIVE (COMPONENT OUT)] in ]VIDEO SETUP] to
[ONI (page 69) even though your TV cannot accept the progressive signal. In
this case, disconnect the HDMI cable from the unit and then set to [OEF].
• The disc is dirty or flawed.
• Ifthe picture output from your system goes through your VCR to get to your
TV, the copy-protection signal applied to some DVD programs could affect
picture quality. If you still experience problems even when you connect your
unit directly to your TV, try connecting your unit to your TV's vide(>input
(page 28).
* Depending on the country model, 1720x 576p1 may appear.
• The aspect ratio on the disc isfixed.
The subwoofer and the front speakers in this system are magnetically shielded to
prevent magnetic leakage. However, some leakage may occur, as a high-strength
magnet is employed. If this happens, check the lbllowing items:
• If the speakers arc used with aCRT-based TV or prqiector, install the speakers
at least (1.3 meters (1.0 It) from the TV set.
• If the color irregularity persists, turn off the TV set once, then turn it on afler 15
to 30 minutes.
• If howling occurs, reposition the speakers farlher away from the TV set.
• Make sure that no magnetic object (magnetic latch on a TV stand, health care
device, toy, etc.) is placed near the speakers.
100_