Filter
Top Products
To prevent the transmission by
neighbors
To prevent the transmission _om neighbors, you
can identil_ the unit mM the surround amplifier
by perfbrming the pairing operation. For details,
see "ldentil)cing the malt with a specific S-AIR
sub trait (Pairing operation)" (page 86).
To attach the cover to the
surround amplifier
After connecting and setting, you can attach file
cover to the surround mnplifier l\)r organizing
and storing excess speaker cords.
1 Attach the speaker cord cover by
sliding it down along the grooves along
the edges of the surround amplifier.
Speaker cord cover
2
Insert the tabs of the speaker cord
holder in the slots of the speaker cord
cover, and press it into place.
Speaker cord holder
\
Surround amplifi_
,I,
\
Surround amplifier
Grooves
Push tile speaker cord cover down until you
hear a click. Turn the surround amplifier
upside down, then store the cords in tile
speaker cord cover.
m
• When detaching, remove the speaker cord holder,
then remove the speaker cord cover. To remove the
speaker cord holder, slightly press the catch of the
holder and lift off. To remove the speaker cordcover,
slightly splay open the edges of the cover and slide
down.
• Do not use excessive force to store the cords.
43us