Filter
Top Products
[ON]: The test tone is emitted l]'om each speaker
ill sequence while adjusting level. When you
select one of the [SPEAKER SETUP] items, tile
test tone is emitted from each speaker in
sequence.
Adjust the sound level as t_)llows.
1 Set the [TEST TONE] to [ON].
2 Press (.-/,I,/4,/--)repeatedly to select the
desired speaker and the level.
3 Press @.
4 Repeat Steps 1 to 3.
I
5 Press (.-/'1'/4,/-.)repeatedly to set [TEST
TONE] to [OFF] after adjusting the
speaker level.
• The test tone signals are not output from the HDMI
OUT jack.
• To a_{justthe volume of all the speakers at one time.
turn the VOLUME control on the uniL or press
VOLUME +_ on the remote.
• To return to the default setting when changing a
setting, select the item, then press CLEAR. Note that
only the [CONNECTION] setting does not return to
the default setting.
o
75 Us