Filter
Top Products
51
EN
To cancel labeling
Press p on the MD deck.
To check the titles
To check the disc titles, press SCROLL while
the play is being stopped. To check the track
titles, press SCROLL while in play. The titles
are displayed scrolling in the display. To
stop scrolling, press SCROLL. Press the
button again to restart scrolling.
To change an existing title
Start over from step 1.
To erase all titles
1 Press EDIT/NO repeatedly until “Name
Erase ?” appears.
2 Press ENTER/YES.
All the disc titles and track titles are erased.
To cancel erasing, press p on the MD deck.
Tips
• You can label a track title while playing or
recording, but you must complete the labeling
before the track ends.
• You can undo a name erasion.
See “Undoing the last edit” on this page.
Undoing the last edit
— Undo Function
This function lets you cancel the last edit and
restore the contents of the MD to the
condition before the edit.
Note, however, that you cannot undo an edit
if you do any of the following after the edit:
• Press the r REC or CD SYNC button on
the MD deck.
• Update the TOC by turning the power off
or ejecting the MD.
• Disconnect the AC power cord.
1 While the deck is stopped with no
track number appearing in the
display, press EDIT/NO repeatedly
until “Undo ?” appears.
“Undo ?” does not appear if you have
done no editing.
r REC
=
SELECTOR
+
0)
p
· ∏
§
EJECT
•
•
•
•
•
•
•
•
•
0
10
=
SELECTOR
+
·∏
§
OPEN/CLOSE
1 2,3
p
continued