Filter
Top Products
6
Step 1: Hooking up the system
(continued)
4 Connect the FM aerial.
Extend the FM aerial horizontally.
Jack type A
Jack type B
5 For models with a voltage selector, set
the VOLTAGE SELECTOR on the rear
of the amplifier to the position of your
local mains voltage.
220V-240V
110V-120V
VOLTAGE SELECTOR
6 Connect the mains lead to the mains.
The supplied speakers can be used as either
the left or right speakers.
Place the speaker connected to the
SPEAKER R terminals on the right side, and
the speaker connected to the SPEAKER L
terminals on the left side of the system.
L (left) R (right)
Notes
• Keep the speaker cords away from the aerials
to prevent noise.
• Be sure to connect both left and right
speakers. Otherwise, no sound will be
produced.
3 Connect the AM aerial.
Set up the AM loop aerial, then connect it.
AM
AM loop aerial