Filter
Top Products
26
3 Press . or > to select the desired
preset station.
Preset number and frequency (or station
name* or RDS station name**)
*
The station name appears only if you have
labelled the station (see page 27).
**
European model only.
To Do this
Turn off the radio Press ?/1 to turn off the
system.
Adjust the volume Press VOLUME + or –.
Listening to non-preset radio
stations
• Press TUNING MODE repeatedly until
“MANUAL” appears in step 2, then press m
or M to tune in the desired station (Manual
Tuning).
• Press TUNING MODE repeatedly until
“AUTO” appears in step 2, then press m or
M. The frequency indication changes and the
scanning stops when the system tunes in a
station (Automatic Tuning).
To cancel Automatic Tuning
Press TUNING MODE.
Listening to the radio
(continued)
Tips
• You can switch from another source to the tuner
just by pressing TUNER/BAND on the tuner
(Automatic Source Selection).
• To improve broadcast reception, adjust the supplied
aerials, or connect a commercially available
external aerial (see page 36).
• When an FM stereo programme has static noise,
press STEREO/MONO on the remote until
“MONO” appears. There will be no stereo effect,
but the reception will improve. Press the button
again to restore the stereo effect.