Filter
Top Products
17
The CD Player/The Tape Deck
The Tape Deck
Recording a CD on a
tape
— CD-TAPE Synchro Recording
You can make an analogue recording of a CD on a
tape. You can use TYPE I (normal) or TYPE II
(CrO2) tape. The recording level is automatically
adjusted.
You can also record a programme of favourite
tracks (see page 20).
To turn on the system, press ?/1 (power).
?/1 (power)
1 Press A on the tape deck to open the
cassette tray and insert a blank tape.
With the side you want to
record on facing up.
Press A again to close the cassette tray.
2 Press A on the CD player and place a
CD on the disc tray.
With the label side up.
When you play a CD single (8 cm CD),
place it on the inner circle of the tray.
Press A again to close the disc tray.
3 Turn FUNCTION until “CD” appears.
4 Press CD SYNC REC.
The CD SYNC REC indicator lights up.
The tape deck stands by for recording and
the CD player pauses for play.
5 Press DIRECTION repeatedly until g
appears to record on one side or h (or
j) to record on both sides.
61
54
3
DOLBY NR*
2
* This tape deck is equipped with the Dolby B-type
noise reduction system.
continued