Filter
Top Products
41
GB
Storing Information About CDs (Custom Files)
Storing Information About CDs (Custom Files)
Using the Player with Another Component
Controlling Another CD Player
(Advanced Mega Control)
This unit can control a second CD player (see
“Connecting another CD player” on page 6). Even
when a second CD player is connected, the controls on
both of the units will function. When you press the
play button on either unit, the operating player stops
and the idle player starts. Make sure that “2nd
DETECTED” appears in this player’s display after
turning on both players. Note that, depending on the
player, you may not be able to operate all the functions
of the second CD player.
The controls indicated in the illustration below are
effective while the MEGA CONTROL button is lit.
To operate the master player, press MEGA CONTROL
so that the MEGA CONTROL button goes off, and to
operate the second player, press MEGA CONTROL so
that the MEGA CONTROL button lights up.
Using the Player with Another Component
1 Press MEGA CONTROL on this player.
The MEGA CONTROL button and “2nd” in the
display light up. The display shows the current
disc number or Disc Name of the second player.
2 Select the desired play mode.
To program tracks, use the controls on the second
player.
3 Press H on this player to start playing.
The play starts and the display shows the current
disc, track numbers, and the playing time of the
track.
While the MEGA CONTROL button is lit, you can
control the second player with the controls on this
player.
To control the master player again
Press MEGA CONTROL. The MEGA CONTROL button goes
off and you can control the master player.
To control the master player again by using the remote, you
have to reselect the master player by pressing PLAYER
SELECT on the remote.
To control the second player directly using the supplied
remote Z
While the MEGA CONTROL button is off, press PLAYER
SELECT repeatedly until “2nd player” appears in the remote’s
display.
To start playback, move the cursor to select the disc, then
press the Easy scroll key.
I / 1
Play mode buttons
(CONTINUE/SHUFFLE/
PROGRAM/REPEAT)
MEGA
CONTROL
MENU/NO
H
. AMS >
JOG
xX
CONTINUE
PROGRAM
NAME SCAN
MENU
PUSH ENTER
TRACK
PLAYER SELECT
BACK
DISC
SKIP
SHUFFLE
REPEAT
SCROLL
H
x
X
PLAYER
SELECT
./>
m/M
CD2
GROUP
HI LIGHT
TEXTCDMULTI
PROGRAM 1 2 3 DELETE FILE FADE
CD3
REPEATSHUFFLE1
SECSTEPMINAT.
GROUPTRACK
HITAT.NEXT
ALL SDISC
DISC
*DISC-4 *** ***
CD1
2nd
Current disc number or the Disc Name
CD3/ 300d i scs
2nd p layer
2nd PLAYER CD3