Filter
Top Products
Getting StartedGetting Started
9
GB
Storing player data in the remote
The remote checks and stores the player data such as
the command mode sent from the player(s) so that you
can use the remote to control the player(s).
Turn on the player before operation.
1 Press MENU.
Note the V mark indicates that the menu
continues.
Press the Easy scroll key downward to see the next
items.
2 Move the cursor (B) to “Set up” by using the Easy
scroll key, then press the Easy scroll key.
3 Move the cursor to “Player check,” then press the
Easy scroll key.
The display shows the disc data in the player after
“Now player checking...” appears.
When you connect another CD player, the disc
data in the second CD player also appears.
Note
When you change the command mode of the player or
connect a 2nd player, be sure to perform “Player check.”
Name se a r ch
Program play
Program input
Artis selectt
CD1
Player check
Back l i ght mode
Memo r y c l e a r
Contrast adjust
CD1
aster player
=CD1/400discs
M
CD1
Adjusting the display contrast of the
remote
1
Press MENU.
2 Move the cursor (B) to “Set up” by using the Easy
scroll key, then press the Easy scroll key.
3 Move the cursor to “Contrast adjust,” then press
the Easy scroll key.
4 Adjust the contrast by pressing the Easy scroll key
up or down and holding until the desired level of
contrast is attained.
5 Press the Easy scroll key.
aster player
= CD1/400discs
= CD3 / 51d i scs
nd
M
2 player
CD1
Name se a r ch
Program play
Program input
Artis selectt
CD1
Player check
Back l i ght mode
Memo r y c l e a r
Contrast adjust
CD1
ONTRAST
ADJUST
ad j us
on
C
ctrast
t
CD1