Filter
Top Products
Storing Information About CDs (Custom Files)
28
GB
4 Turn the JOG dial until the desired character
appears in the display.
The cursor disappears and the first space for the
Disc Name flashes.
As you turn the JOG dial clockwise, the characters
appear in the following order. Turn the JOG dial
counterclockwise to go in reverse order.
(space) A B C D E F G H I J K L M N O P Q R S T U
V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w
x y z 0 1 2 3 4 5 6 7 8 9 ! " # $ % & ' ( ) * + , – . / : ; <
= > ? @ _
5 Push the JOG dial to select the character.
The selected character lights up, and the flashing
cursor appears at the next space to be input.
To make a correction
Press CLEAR and begin again by inputting the correct
characters.
6 Repeat steps 4 and 5 to input more characters.
7 Press YES to store the Disc Name.
The display shows the Disc Name.
Repeat steps 1 to 7 to assign Disc Names to other
discs.
z To change the character type quickly while inputting
characters
Press SCROLL in step 4 above. The character on the
cursor changes to the first character of each character
type. Each time you press SCROLL, the character type
changes as follows:
TEXTCD
1
CD2
GROUP
NO DELAY
MULTI
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEATSHUFFLE 1
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd
ALL SDISC
DISC
S ****** ******
CD1
TEXTCD
1
CD2
GROUP
NO DELAY
MULTI
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEATSHUFFLE 1
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd
ALL SDISC
DISC
S ****** ******
CD1
CDTEXT
1
CD2
GROUP
NO DELAY
MULTI
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEATSHUFFLE 1
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd
ALL SDISC
DISC
SONYHIT **S ***
CD1
Changing the Disc Name
1 Follow steps 1 to 3 in “Labeling discs on the
player” on page 27 to select the Disc Name you
want to change.
2 Turn the . AMS > dial to move the cursor to
the position you want to change.
When the cursor position is on a character, the
character flashes but when the cursor position is
on a blank space, the cursor (
) appears in the
display.
To change characters
Turn the JOG dial until the desired character
appears in the display.
To add characters
Push the JOG dial. The new blank space appears
next to the selected character, then turn the JOG
dial until the desired character appears in the
display.
To erase characters
Press CLEAR. The selected character disappears.
To erase all characters for the current Disc Name
Turn the . AMS > dial to move the cursor to
the first character, then press and hold CLEAR
until all the characters are erased.
3 Repeat step 2 to change more characters.
4 Press YES to store the Disc Name.
Erasing the Disc Name
1 Follow steps 1 to 3 in “Labeling discs on the
player” on page 27 to select the Disc Name you
want to erase.
2 Turn the . AMS > dial to move the cursor to
the first character, then press and hold CLEAR
until all the characters are erased.
3 Press YES.
The Disc Name disappears.
t A t a t 0 t ! t (space)