Filter
Top Products
Playing CDs
25
GB
Playing CDs
z You can label by using the Easy scroll key
Select a character by using the Easy scroll key in step 5.
z If you make a mistake while inputting the
character(s)
To correct a single character that was input
1 Press > until the cursor moves next to the incorrect
character.
2 Press DEL to delete the incorrect character.
3 Input the correct character.
To correct the character currently being input
1 Press DEL to delete the incorrect character.
2 Input the correct character.
To insert a character(s) between the input characters
Press > until the cursor moves next to the point you
want to insert, and enter the character(s).
orPgNameWri
[]
et
Program A: (AB)
SONY B
CD1
orPgNameWri
[]
et
Program A: (AB)
SONY
CD1
Playing the program you create using the
remote’s display
1
Press MENU.
2 Move the cursor (B) to “Program play” by using
the Easy scroll key, then press the Easy scroll key.
3 Select the desired program by pressing the Easy
scroll key up or down, then press the Easy scroll
key.
Keep the remote point toward the player for few
seconds until the program data is completely
transmitted.
Program Play starts when the player finishes
loading the program data from the remote.
If the player fails in loading, the following message
appears. Press the Easy scroll key again.
Note
The program you create using the remote is stored in the
player as PROGRAM 1. If you had previously created a
PROGRAM 1, it is automatically erased.
Name se a r ch
Program play
Program input
Artis selectt
CD1
:A Program A
B:Program B
C:Program C
D:Program D
CD1
Disc4
*DISC4*
Track1
( TRACK1 )
Program
data transfer
CD1
CD1
fai lure !
data transfer
Try aga i n !