Filter
Top Products
1-74
DFS-700/700P
Appendixes
Appendixes
A-9
Effect control parameters (continued)
Pattern
No.
Effect type and adjustable parameters
2284
Lens
F1: Amplitude of modulation (Amp = 0 to 100)
F2: Size of lens (Size = 0 to 100)
F3: Form of lens (FORM = FLAT/INNER/OUTER/SPHERE)
F4: Modulation aspect ratio (Aspect = Taller to wider)
F5: Direction of modulation (Angle = 0 to 99)
2400
to
2407
2410
to
2419
Two-picture brick
F1: Depth (Depth = 0 to 100)
F3: Stretching of picture in depth section (Strch = 0 to 100)
F4: Position of picture in depth section (Posi = –100 to +100)
2420
to
2437
Two-picture brick (flip type)
F1: Depth (Depth = 0 to 100)
F2: Form model (FORM = SLAB/DUAL)
F3: Stretching of picture in depth section (Strch = 0 to 100)
F4: Position of picture in depth section (Posi = –100 to +100)
2470
to
2473
Split 3D rotation
F1: Fineness of splitting (Freq = 0 to 100)
2480
to
2489
Masked flip
F1: Mask shape (PATTERN = CIRCLE/HEART/RECT/DIA/HEXA/
5STAR/6STAR/WAVE)
F2: Fineness of splitting (Freq = 0 to 100)
F3: Bias of splitting (Bias = 0 to 100)
2490
to
2499
Masked flip
F1: Mask shape (PATTERN = CHECK1/ CHECK2/ CHECK3/CHECK4/
CHECK5/LINE/RECT1/RECT2)
F2: Mask slant (SLANT = ON/OFF)
2501
to
2507
2ch picture-in-picture
F1: Timing at which picture appears (Delay = 0 to 100)
F2: Picture position (POSITN = HORZ1/HORZ2/HORZ3/VERT1/VERT2/
VERT3/DIAG1/DIAG2)
F3: Picture size (Size = 0 to 100)
F4: Relative position on X axis (Gap_X = 0 to 100)
F5: Relative position on Y axis (Gap_Y = 0 to 100)
2508
2509
2ch picture-in-picture
F2: Picture positon (POSITN = HORZ1/HORZ2/HORZ3/VERT1/VERT2/
VERT3/DIAG1/DIAG2)
F3: Picture size (Size = 0 to 100)
F4: Relative positon on X axis (Gap_X = 0 to 100)
F5: Relative positon on Y axis (Gap_Y = 0 to 100)
(continued)
Appendixes
A-8
Appendixes
Effect control parameters (continued)
Pattern
No.
Effect type and adjustable parameters
2260
to
2269
Ripple
F1: Amplitude of modulation (Amp = 0 to 100)
F2: Frequency of modulation (Freq = 0 to 100)
F3: Speed of modulation (Speed = –100 to +100) (2260 to 2265 only)
or area of modulation (Area = –100 to +100) (2266, 2267)
F4: Aspect ratio of modulation (Aspect = 0 to 100)
F5: Direction of modulation (Angle = 0 to 99)
F6: Swirl modulation selection (SPMOD = OFF, IN, OUT) (2260 to 2265
only)
F7: Degree of swirl modulation (Spiral = 0 to 100) (2260 to 2265 only)
2270
2271
Burst
F1: Degree of splitting (Freq = 0 to 100)
F2: Rotation around Z axis (Rot = –100 to +100)
F3: Degree of modulation (Spiral = –100 to +100) (2270) or area of
modulation (Area = 0 to 100) (2271)
F4: Form of modulation (FORM = RANDAM/CONST/WAVE1/WAVE2/
LINE1/LINE2/PIXEL1/P1XEL2)
2272 Broken glass
F1: Degree of splitting (Freq = 0 to 100)
F2: Rotation around Z axis (Rot = –100 to +100)
F3: Splitting adjustment (Split = 0 to 100)
2273 Explosion
F1: Stream area (AREA = NARROW/MEDIUM/WIDE/SPWIDE)
F2: Form of modulation (FORM = RANDAM/PIXEL/LINE/WAVE1/
WAVE2/WAVE3/WAVE4/CONST)
F3: Degree of swirl modulation (Spiral = –100 to +100)
F4: Modulation aspect ratio (Aspect = Taller to wider)
F5: Direction of modulation (Angle = 0 to 99)
2274 Ring
F1: Amplitude of modulation (Amp = –100 to +100)
F2: Degree of splitting (Freq = 0 to 100)
F4: Modulation aspect ratio (Aspect = Taller to wider)
F5: Direction of modulation (Angle = 0 to 99)
2275
to
2277
Swirl
F1: Amplitude of modulation (Amp = –100 to +100)
F4: Modulation aspect ratio (Aspect = Taller to wider)
F5: Direction of modulation (Angle = 0 to 99)
2278
2279
Swirl (soft rotation)
F1: Degree of modulation (Soft = 0 to 100)
2280 Amoeba
F2: Fineness of modulation (Freq = 0 to 100)
2283 Meltdown
F1: Form of modulation (FORM = WAVE1/RAND1/WAVE2/RAND2)
F2: Direction of modulation (TRANS = NORM1/NORM2/REV1/REV2)
Effect Control Parameter List
(continued)