Filter
Top Products
43
GB
Additional Information
• ID3 tag information for MP3 audio files
is displayed when the files have ID3
version 1 or ID3 version 2. If there are
ID3 version 1 and version 2 tags, ID3
version 2 tag information has priority.
USB device
You cannot start transferring to an
USB device.
• The following problems may have
occurred.
– The USB device is full.
– The number of audio file and folder
that system can recognize has reached
the upper limit.
–The USB
device is write-protected.
Transferring is stopped before it is
finished.
• You are using an unsupported USB
device. See “Compatible devices with
this system” (page 52) for the supported
device types.
• The USB device is not formatted
correctly. Refer to the USB device
operating instructions for how to
format.
• Turn off the system and remove the
USB device. Then, turn on the system.
If the USB device has a power switch,
turn the USB device off and then on
again after removing it from the system.
Then perform transferring again.
• If the transferring and erase operations
are repeated multiple times, the file
structure within the USB device
becomes complex. Refer to operating
instructions of the USB device on how
to remedy this problem.
Transferring to an USB device results
in an error.
• You are using an unsupported USB
device. See “Compatible devices with
this system” (page 52) for the supported
device types.
• The USB device was disconnected or
the power was turned off during
transferring. Delete the partially-
transferred file, and transfer again. If
this does not fix the problem, the USB
device may be broken. Refer to
operating instructions of the USB
device on how to remedy this problem.
• Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device off
and then on again after removing it from
the system. Then perform transferring
again.
Audio files or folders on the USB
device cannot be erased.
• Check if the USB device is write-
protected.
• The USB device was disconnected or
the power was turned off during the
erase operation. Delete the partially-
erased track. If this does not fix the
problem, the USB device may be
broken. Refer to operating instructions
of the USB device on how to remedy
this problem.
Are you using a supported USB
device?
• If you connect an unsupported USB
device, the following problems may
occur. See “Compatible devices with
this system” (page 52) for the supported
device types.
–The USB
device is not recognized.
– File or folder names are not displayed
on this system.
– Playback is not possible.
– The sound skips.
– There is noise.
– A distorted sound is output.
– Transferring stops before it is finished.
Continued
l