Sony 3-300-703-11(2) Stereo System User Manual


 
35
GB
Other Operations
6 Repeat steps 3 to 5 to program
additional folders, tracks or files.
7 Press HS on CHANNEL B (or
N on the remote).
Program Play starts.
Other operations
Note
(For USB function only)
The program list is cleared when you perform
the erase operation.
Tips
The program you made remains in the
system’s memory even after it has been
played back. Press HS
on CHANNEL B
(or N on the remote) to play back the same
program again.
If “--.--” appears instead of the total playing
time during programming, this means:
– you have programmed a track in an AUDIO
CD with track number exceeds 20.
– the total playing time has exceeded 100
minutes.
– you have programmed an audio file.
Presetting radio
stations
You can preset your favourite radio
stations and tune them in instantly by
selecting the corresponding preset
number.
Use buttons on the remote to preset
stations.
1 Tune in the station you want
(see “Listening to the radio”
(page 20)).
2 Press TUNER MEMORY.
A preset number flashes in the display.
The stations are stored from preset
number 1.
3 Press +/– repeatedly to select
the preset number you want.
If another station is already assigned to
the selected preset number, the station
is replaced by the new stations.
4 Press .
“Complete!” appears in the display.
The station is stored.
To Do this
Cancel Program
Play
When playback is
stopped, press PLAY
MODE on the remote
repeatedly until “PGM”
disappear from the
display.
Delete the last step
from the program
list
Press CLEAR on the
remote when playback is
stopped.
Preset number
Continued
l