Filter
Top Products
38
GB
Using the timer
The system offers three timer functions.
You can set the system to turn off after a
certain time, so that you can fall asleep to
music.
Press SLEEP on the remote
repeatedly.
The minute display (turn-off time)
changes.
If you select “AUTO”, the system
automatically turns off after the current
disc or USB device stops or after 100
minutes. When you played back the
source on CHANNEL A and B
simultaneously, the system will turns off
after the playback on CHANNEL B stops.
Do not select “AUTO” during CD-USB
Synchronized Transfer or the erase
operation.
Note
The system is not turned off on the preset time
during the USB erase operation.
The system will only automatically turns off
after the USB erase operation finish.
Tip
To check the remaining time, press SLEEP on
the remote once. However, you cannot check
the remaining time if you select “AUTO”.
You cannot activate both the Play Timer
and the Recording Timer at the same time.
If you use either with the Sleep Timer, the
Sleep Timer has priority.
Make sure you have set the clock.
Use the buttons on the remote for the
operation.
Play Timer:
You can wake up to music from disc,
iPod 2, tuner or optional USB device at
a preset time.
You can only set the Play Timer for audio
source on CHANNEL B only.
Recording Timer:
You can transfer onto a transferable USB
device from a preset station at a specified
time.
1 Prepare the sound source.
For Play Timer:
Prepare the sound source and then
press VOLUME +/– to adjust the
volume.
To start from a specific track or file,
create your own program (page 34).
For Recording Timer:
Tune in the preset radio station you
want (page 35).
2 Press TIMER MENU.
3 Press V/v or ./>
repeatedly to select “PLAY
SET?” or “REC SET?”, then
press .
“ON” appears and the hour indication
flashes in the display.
4 Set the time to start playback or
transferring.
Press
V/v or ./> repeatedly to
set the hour, then press .
The minute indication flashes in the
display. Use the procedure above to set
the minute. “OFF” appears and the
hour indication flashes in the display.
5 Set the time to stop playback or
transferring using the same
procedure as step 4.
Sleep Timer
Play Timer/Recording Timer