Filter
Top Products
92
GB
D:\NORM'S JOB\SONY HA\SO0054\STR-DA2400ES\CEL VERSION\3289204423\04GB-
STRDA2400ESUC\090OTH_GB.fm
masterpage: Left
STR-DA2400ES
3-289-204-42(3)
G DTS/
DTS-ES/
DTS 96/24
“DTS” lights up when the
receiver is decoding DTS
signals.
“DTS-ES” lights up when
the receiver is decoding
DTS-ES signals.
“DTS 96/24” lights up
when the receiver is
decoding DTS 96/24 (DTS
96 kHz/24 bit) signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
“AUTO” (page 87).
H D.RANGE Lights up when dynamic
range compression is
activated.
I SP A/SP B/
SP A+B
Lights up according to the
speaker system used
(page 44). However, these
indicators do not light up if
the speaker output is turned
off or if headphones are
connected.
J Tuner
indicators
Lights up when using the
receiver to tune in radio
stations, etc.
Note
“RDS” appears for models of
area code CEL, CEK, ECE
only.
K SLEEP Lights up when the sleep
timer is activated.
L A.DIRECT Lights up when the receiver
is processing Analog Direct
signals.
M MEM Lights up when a memory
function, such as Preset
Memory etc., is activated.
Name Function
N ; PL/
; PL II/
; PL IIx
“; PL” lights up when the
receiver applies Pro Logic
processing to 2 channel
signals in order to output
the center and surround
channel signals.
“; PL II” lights up when
the Pro Logic II decoder is
activated.
“; PL IIx” lights up when
the Pro Logic IIx decoder is
activated.
However, these indicators
do not light up if both the
center and surround
speakers are not connected
and you select a sound field
using the A.F.D. button.
Note
Dolby Pro Logic IIx decoding
does not function for signals
with a sampling frequency of
more than 48 kHz.
O BI-AMP Lights up when BI-AMP
Speaker setting is set to
“ON”.
P EQ Lights up when the
equalizer is activated.
Q NEO:6 Lights up when DTS Neo:6
Cinema/Music decoding is
activated.
R DTS-HD
MSTR/
DTS-HD HI
RES
“DTS-HD MSTR” lights up
when the receiver is
decoding DTS-HD Master
Audio signals.
“DTS-HD HI RES” lights
up when the receiver is
decoding DTS-HD High
Resolution signals.
S LPCM Lights up when Linear
PCM signals are detected.
Name Function