Sony 3-289-204-42(3) Stereo Receiver User Manual


 
104
GB
D:\NORM'S JOB\SONY HA\SO0054\STR-DA2400ES\CEL VERSION\3289204423\04GB-
STRDA2400ESUC\090OTH_GB.fm
masterpage: Left
STR-DA2400ES
3-289-204-42(3)
To select Enhanced Surround
Mode
1
Press AMP.
2 Press MENU.
3 Press V/v repeatedly to select
<SURROUND>, then press or b.
4 Press V/v repeatedly to select
<E.SUR MODE>, then press or b.
5 Press V/v repeatedly to select the
Enhanced Surround Mode you want,
then press .
Note
The selected Enhanced Surround Mode can only be
applied if you have selected “E.SURROUND” by
pressing A.F.D repeatedly.
Press 2CH/A.DIRECT repeatedly to
select “A.DIRECT”.
For details on the tuner function, see “Tuner
Operations” (page 72).
Tuning radio stations
1
Press TUNER repeatedly to select the
FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2 Press TUNING + or TUNING –.
Press TUNING + to scan from low to high
frequencies, press TUNING – to scan from
high to low frequencies. The receiver stops
scanning whenever a station is received.
You can also press TUNING MODE on the
receiver to select “AUTO” and then turn
TUNING +/– to select stations.
Selecting a frequency directly
(Direct Tuning)
1
After selecting the FM or AM band,
press D.TUNING.
2 Press SHIFT, then press numeric
buttons to enter the frequency.
3 Press .
1 Tune in the station that you
want to preset.
For details on the operation, refer to
“Tuning radio stations”.
2 Press SHIFT, then press ENT/
MEM.
You can also use MEMORY/ENTER on
the receiver.
“MEM” lights up for a few seconds.
Perform steps 3 and 4 before “MEM”
disappears.
3 Press PRESET + or PRESET –
to select a preset number.
30 FM and 30 AM preset numbers are
available. If “MEM” disappears before
you select the preset number, start again
from step 2.
4 Press ENT/MEM.
If SHIFT indicator is light off before you
press ENT/MEM, press SHIFT.
You can also use MEMORY/ENTER on
the receiver. The station is stored as the
selected preset number.
If “MEM” disappears before you press
ENT/MEM, start again from step 2.
5 Repeat steps 1 to 4 to preset
another station.
Listening to the sound without
any adjustment (ANALOG
DIRECT)
Listening to the FM/AM radio
Presetting radio stations