Filter
Top Products
2.Installation
27
Adjusting a screen image (at receiver(s))
TIP
- You normally do not have to adjust a screen image at the receivers since the monitor will
automatically make adjustments.
If adjustment is necessary, go to the Web page of the transmitter. Click
Video/Audio under Tools and click the Start button next to Maintenance
screen mode to switch to maintenance mode and output the maintenance
screen to the receivers. The MVDS will automatically adjust the image quality
and position, etc. of the monitor.
When the adjustment of the screen image for the monitor is complete, click
Stop button to nish the maintenance mode.
If the adjustment does not go properly, click Video/Audio/Data under
Conguration and congure each value manually.
TIP
- Congure each parameter appropriate for your monitor. If incorrect parameters are set, the
monitor may malfunction.
1.
2.
3.