Filter
Top Products
2.Installation
19
2.2 Congure this product
2.2.1 Assign IP address
When the cable connections and power on are completed, congure the network
settings and adjust the screen images for the MVDS transmitter and receivers.
To simplify the conguration process, the MVDS transmitter and receivers support
automatic conguration of the IP address. By default, they attempt to load an
IP address via DHCP when powered on. If no DHCP server is found, then the
transmitter and each of the receivers are loaded with a random IP address of
169.254.xxx.xxx. Note that the same IP address is used for both the wireless and
wired networking functionality.
- If you are using the automatic conguration process, you may skip to the next section.
Note
If you prefer, you can use Admin Manager to manually assign an IP address for the
MVDS transmitter and for each MVDS receiver:
1.
First assign a static IP address to the PC that you are using for setup.
(Example: 10.10.10.10)
2.
When you run the Admin Manager program, a list of the available MVDS
transmitters (model X-1T) and receivers (X-1R) will appear on the main Admin
Manager screen.