Silex technology MVDS X-1 Stereo Receiver User Manual


  Open as PDF
of 76
 
2.Installation
23
Network conguration
Congure the IP address and wireless settings. Select Network under
Conguration in the Web page.
* Required for both Transmitter and Receivers
TIP
- The MVDS transmitter and receivers operate without the need to manually congure an IP
address as they supports Auto IP function.
- It is impossible to broadcast a movie across a router.
<DHCP, IP, Subnet, Gateway>
Congure these settings according to your network environment (by default,
DHCP and the Auto IP function are enabled).
<Wireless>
Select Enable for the Wireless Interface. Select the options for Wireless Mode,
SSID, WEP, etc. appropriate for your environment.
TIP
- Be sure to use WEP security, especially if you are using MVDS with a public wireless network.
 previous next