Filter
Top Products
ENGLISH
60
• The Room 2 function allows enjoying one source in the main room while playing another in a different room at the
same time.
• Room 2 : To turn on or off the ROOM 2 function.
• Input : To select the desired ROOM 2 source.
• Volume : To adjust the volume on the power amplifier assigned
to "Surr Back ↔ Room 2" or "Room 2".
■Notes:
• The analog signals from the EXTERNAL INs and the digital
signals cannot be output to the different room, meaning no
playback in a different room.
• Only the (composite) video signals can be output to the different
room.
SETTING THE MULTI ROOM SETUP
• You can adjust the volume on the power amplifier assigned to "Surr Back ↔ Room 2" or "Room 2" when the ROOM 2
speaker terminals are connected to the speakers in a different room.(For details, refer to "When selecting the AMP Assign"
on page 45.)
■Note:
• The Volume setting is invalid when the AMP Assign is assigned to “Bi AMP” or “Surround Back”.
When selecting the Input
• You can select the desired among Main source, Video 1 ~ Video 3, BT, CD, Tape, F.AUX, Tuner as a ROOM 2 source.
■Note:
• When the EXTERNAL IN is selected as a main input, if the Main source is selected as a Room 2 input, no audio signal can
be heard in the different room (ROOM 2).
When selecting the Volume
On : To turn on the Room 2 function.
↕
Off : To turn it off.
■Notes:
• When the Room 2 is set to Off, the Input and the Volume cannot be selected.
• When you do not use the Room 2 function, set the Room 2 to Off to save electricity.
When selecting the Room 2
1. Press the CURSOR UP/DOWN buttons to select the desired item, then press the CURSOR RIGHT button to
enter its setting menu.
2. Press the CURSOR UP/DOWN buttons to set the selected item as desired, then press the ENTER button.
• When the CURSOR LEFT button is pressed on a setting menu, the previous menu will be returned to.
• When adjusting the Volume, use the CURSOR UP/DOWN buttons only.
Room 2 Set
Input
Volume
B
ACK NEXT
RD-8504(A)_ENG_091118:RD-8504(A)2009-11-18오 6:41페이지60