Filter
Top Products
52
■When selecting the desired unit
• You can select either Meter or Feet.
• Once a unit is selected, the distances are automatically changed in the selected unit.
■When setting the distance
• You can set the distance within the range of 0 ~ 9.0 meters in 0.1 meter intervals (or 0 ~ 30 feet in 0.5 feet intervals).
• When setting the distance, use the CURSOR UP/DOWN buttons only.
• When the CURSOR LEFT button is pressed on the setting menu, the previous menu will be returned to.
When selecting the Speaker Distance
■Note :
• You cannot select the speakers set to "No".
■About the speaker distance
When enjoying multi-channel surround playback with Dolby Digital and DTS sources, etc., it is ideal that the center, surround
and surround back speakers, etc. should be the same distance from the main listening position as the front speakers. By
entering the distance between the listening position and each speaker, the delay times of center, surround and surround back
speakers, etc. are automatically adjusted to create an ideal listening environment virtually as if the center, surround and
surround back speakers, etc. were at their ideal locations respectively.
1. Press the CURSOR UP/DOWN buttons to select the Speaker Distance, then press the CURSOR RIGHT
button to enter the setting menu.
2. Press the CURSOR UP/DOWN buttons to select the desired item, then press the CURSOR RIGHT button to
enter its setting menu.
3. Press the CURSOR UP/DOWN buttons to set the selected item as desired, then press the ENTER button.
4. Repeat the above steps 2 and 3 until the distances are all set as desired.
UNIT
Front Left
Center
Front Right
Surround Right
Surr Back Right
Surr Back Left
Surround Left
Subwoofer
B
ACK NEXT
ENGLISH
RD-8504(A)_ENG_091118:RD-8504(A)2009-11-18오 6:41페이지52