Filter
Top Products
48
After performing the steps ~ in “Adjusting the current channel level” procedure on page
47, press the ENTER button.
1
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset memory(“REF. 1”, “REF. 2”) and recall the
memorized whenever you want.
• The “1” of “REF. 1” indication flickers.
• Each time the CURSOR LEFT( ) or
RIGHT( ) button is pressed, “REF. 1” or “REF.
2” is selected.
• The adjusted channel levels has now been
memorized into the selected memory.
Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired preset memory,
then press the ENTER button.
2
• “USER” may be displayed instead of “REF. 1”
or “REF. 2”.
Press the CURSOR
UP( )/DOWN( ) buttons to select
the preset memory mode.
1
• Then the channel levels memorized into the
selected preset memory are recalled.
Press the CURSOR LEFT( )/
RIGHT( ) buttons to select the
desired one of REF. 1 and REF. 2.
2
Recalling the memorized channel levels
DEVICE SELECT
VOLUME
TUNER CD
AUX
TAPE
VIDEO1
VIDEO2
VIDEO3
EXT.IN
AUD