Filter
Top Products
LISTENING TO RADIO BROADCASTS
Presetting radio stations
Auto tuning
• Each time this button is pressed, the mode
changes as follows;
• The tuner will now search until a station of
sufficient strength has been found. The display
shows the tuned frequency and “TUNED”.
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
• When pressing the TUNE +/- buttons for more
than 0.5 second on the remote control, you need
not select the auto tuning mode on step .
• Manual tuning is useful when you already know the
frequency of the desired station.
• Select the manual tuning mode performing the
steps to in “Auto tuning” procedure and press
the TUNING/PRESET / or TUNE +/- buttons
repeatedly until the right frequency has been
reached.
• When pressing the TUNE +/- buttons repeatedly
on the remote control, you need not select the
manual tuning mode on step in “Auto tuning”
procedure.
• You can store up to 30 preferred stations in the
memory.
• “MEM” is flickering for several seconds.
Manual tuning
• Each time this button is pressed, the band is
changed to FM or AM.
• When pressing the BAND button without
selecting the TUNER, the tuner will be selected
automatically.
Select the tuner.
1
Select the auto tuning mode.
3
Select the desired band.
2
Press the TUNING/PRESET
buttons briefly or press the TUNE +/-
buttons for more than 0.5 second.
4
Tune in the desired station with auto or
manual tuning.
1
Press the MEMORY/ENTER button.
2
34